Wireless Networking
 

I live in a small communal living facility with 4 people. Some time
ago I setup a wirless AP. One friends however is still connected with
Ethernet cable that is unsightly. So wireless is the way to go.

He has an old IBM Aptiva desktop running Windows ME. I installed for
him a D-Link DWL-G510. That was easy and it connects with the AP.

The problem is ME does not use this to connect to the network. In the
configuration settings the DWL-G510 is listed. I have taken to steps
to remove the LAN and Modem adapters. The modem is removed from the
computer and the integrated LAN disabled in BIOS.

I have configured the DWL-G510 for 'Infrastructure' and configured the
TCP-IP settings as per this document:

http://www.crn.com/white-box/59201759

Problem: Does not connect.

IPCONFIG reports only the Ethernet Adapter using the address
169.254.254.95 s/mask 255.255.0.0

It seems to me to be locked into the old config settings somewhere.

Can someone help please.

Wireless Networking
 

What wireless card does the WinME machine have installed ?

--
Joan Archer
http://www.freewebs.com/crossstitcher
http://lachsoft.com/photogallery

"Bobfl42" wrote in message
...
I live in a small communal living facility with 4 people. Some time
ago I setup a wirless AP. One friends however is still connected with
Ethernet cable that is unsightly. So wireless is the way to go.

He has an old IBM Aptiva desktop running Windows ME. I installed for
him a D-Link DWL-G510. That was easy and it connects with the AP.

The problem is ME does not use this to connect to the network. In the
configuration settings the DWL-G510 is listed. I have taken to steps
to remove the LAN and Modem adapters. The modem is removed from the
computer and the integrated LAN disabled in BIOS.

I have configured the DWL-G510 for 'Infrastructure' and configured the
TCP-IP settings as per this document:

http://www.crn.com/white-box/59201759

Problem: Does not connect.

IPCONFIG reports only the Ethernet Adapter using the address
169.254.254.95 s/mask 255.255.0.0

It seems to me to be locked into the old config settings somewhere.

Can someone help please.

Wireless Networking
 

Joan Archer wrote:
What wireless card does the WinME machine have installed ?

As I said it is a D-Link DWL-G510 PCI card that according to the
manufacturers is compatible with Windows ME.

Wireless Networking
 

On Thu, 13 Nov 2008 17:25:28 -0800 (PST), Bobfl42
wrote:

IPCONFIG reports only the Ethernet Adapter using the address
169.254.254.95 s/mask 255.255.0.0


Right click my computer - properties - device manager

Disable the wired adaptor here. If the wireless adaptor isn't listed
then re-install it. Once installed it should appear in the list next
to the disabled wired adaptor. If it hasn't installed correctly it
might appear in the wrong place in the device list as a pci ethernet
controller. If you see something listed like that then delete it and
reboot. On restart you should be asked for the driver disk which came
with the network card.


Jim.

Wireless Networking
 

James Egan wrote:

Disable the wired adaptor here. If the wireless adaptor isn't listed
then re-install it. Once installed it should appear in the list next
to the disabled wired adaptor. If it hasn't installed correctly it
might appear in the wrong place in the device list as a pci ethernet
controller. If you see something listed like that then delete it and
reboot. On restart you should be asked for the driver disk which came
with the network card.


Jim.


I did that and completely removed the Ethernet adapter drivers etc. The
wireless loaded OK and was visible in the Network set-up and no other
adapter. I also removed the modem just in case. On the surface all
looked well. However the results were as reported.

Bob...

Wireless Networking
 

On Mon, 17 Nov 2008 09:58:05 +1100, Bob wrote:

I did that and completely removed the Ethernet adapter drivers etc. The
wireless loaded OK and was visible in the Network set-up and no other
adapter. I also removed the modem just in case. On the surface all
looked well. However the results were as reported.

Bob...


That's very strange.

Please post the ipconfig statistics and the routing table. Perhaps
that might shed some light.

To do this get to a command prompt and type

ipconfig /all c:\temp1.txt
route print c:\temp2.txt

Then cut'n'paste the contents of temp1.txt and temp2.txt with notepad.


Jim.