Problem Networking Win2000 Computers
I would appreciate any suggestions from the gurus here as to how I can get my two Win2000Prof computer talking to each other via Netgear WGR614 router.
I had one 2000Prof and one 98SE networked and both worked fine. Recently I installed 2000Prof on the 98SE and now cannot get them to communicate. Both can see the other computer, but neither one can access the other. The sharing, etc., is all set up like before. All drivers are installed and working except this one... PCI Simple Communications Controller PCI\VEN_1106&DEV_3068&SUBSYS_4C211543&REV_80\3&61A AA01&0&8E 28 I have downloaded and tried installing each of these drivers with no success... VIA Rhine Family Driver, Dated: 10-Aug-2009 Download version 3.84A OS supported Windows 2000, Windows ME, Windows 98, Windows 95, Windows 98SE, Windows NT Chips supported VT8251 Integrated, VT8231, VT8233, VT8235 & VT8237 Integrated (Rhine & Rhine II), VT6103 Rhine (PHY), VT6105/L/LOM and VT6106/H/L/S series (Rhine III), VT6105M Management Fast Ethernet Controller (Rhine III), VT6115 Fast Ethernet Controller (Rhine III), VT6107 Fast Ethernet Controller (Rhine & Rhine II) Notes This driver supports 32 and 64 bit operating systems. VIA Rhine Family Driver, Dated: 29-Jan-2009 Download version 1.14 OS supported Windows 98SE, Windows 95, Windows 98, Windows 2000, Windows ME Chips supported VT8251 Integrated, VT8231, VT8233, VT8235 & VT8237 Integrated (Rhine & Rhine II), VT6103 Rhine (PHY), VT6105/L/LOM and VT6106/H/L/S series (Rhine III), VT6105M Management Fast Ethernet Controller (Rhine III), VT6115 Fast Ethernet Controller (Rhine III), VT6107 Fast Ethernet Controller (Rhine & Rhine II) That's it -- any help would be greatly appreciated. Meanwhile, I'm off to buy more CD's for swapping data. LOL!! Thanks in advance! Bob |
Problem Networking Win2000 Computers
Guv Bob wrote:
I would appreciate any suggestions from the gurus here as to how I can get my two Win2000Prof computer talking to each other via Netgear WGR614 router. You should have checked the activity of this newsgroup (microsoft.public.win98.networking) first before posting a question to it. You would have seen it hasn't had any activity for months - if not years. I have added a more active win-98 group (microsoft.public.win98.gen_discussion) to my reply. I'm guessing that you've probably multi-posted your question to one or more win-2k groups (but I won't bother to check on that). I had one 2000Prof and one 98SE networked and both worked fine. Recently I installed 2000Prof on the 98SE and now cannot get them to communicate. Both can see the other computer, but neither one can access the other. Can either computer ping the other? Can both computers surf the web? If the answer to both questions is yes, then it's a sharing / permissions thing going on. Could also be a protocal-binding issue. |
Problem Networking Win2000 Computers
"Guv Bob" wrote in message
m... I would appreciate any suggestions from the gurus here as to how I can get my two Win2000Prof computer talking to each other via Netgear WGR614 router. I had one 2000Prof and one 98SE networked and both worked fine. Recently I installed 2000Prof on the 98SE and now cannot get them to communicate. Both can see the other computer, but neither one can access the other. The sharing, etc., is all set up like before. All drivers are installed and working except this one... PCI Simple Communications Controller PCI\VEN_1106&DEV_3068&SUBSYS_4C211543&REV_80\3&61A AA01&0&8E 28 I have downloaded and tried installing each of these drivers with no success... VIA Rhine Family Driver, Dated: 10-Aug-2009 Download version 3.84A OS supported Windows 2000, Windows ME, Windows 98, Windows 95, Windows 98SE, Windows NT Chips supported VT8251 Integrated, VT8231, VT8233, VT8235 & VT8237 Integrated (Rhine & Rhine II), VT6103 Rhine (PHY), VT6105/L/LOM and VT6106/H/L/S series (Rhine III), VT6105M Management Fast Ethernet Controller (Rhine III), VT6115 Fast Ethernet Controller (Rhine III), VT6107 Fast Ethernet Controller (Rhine & Rhine II) Notes This driver supports 32 and 64 bit operating systems. VIA Rhine Family Driver, Dated: 29-Jan-2009 Download version 1.14 OS supported Windows 98SE, Windows 95, Windows 98, Windows 2000, Windows ME Chips supported VT8251 Integrated, VT8231, VT8233, VT8235 & VT8237 Integrated (Rhine & Rhine II), VT6103 Rhine (PHY), VT6105/L/LOM and VT6106/H/L/S series (Rhine III), VT6105M Management Fast Ethernet Controller (Rhine III), VT6115 Fast Ethernet Controller (Rhine III), VT6107 Fast Ethernet Controller (Rhine & Rhine II) That's it -- any help would be greatly appreciated. Meanwhile, I'm off to buy more CD's for swapping data. LOL!! Thanks in advance! ReSet 98 In Windows 98 Click Start Go to Settings Click on Control Panel Click Network Tab Configuration Click on File and Print Sharing... Check I Want to be able to give others access to my files I Want to be able to allow other to my printer Click OK Now Click on Tab Identification You see Workgroup it have to be name the same as your Workgroup in Windows 2000 Now Click OK Win-98 will need to reboot After Reboot Go to a Folders that you like to Share Exp: C:\My Music when in the Folder Right Hand Click Click on Properties Click on Tab Sharing Click Shared As Access Type Click Full Click Apply Click OK if it all the PC you like to Share in C:\ do the same as the Exp... On it will work at the Win-2000 side For Windows 2000 Reset it too Bob If you need more help goto::::@ giganews Newsgroup 24hoursupport.helpdesk |
Problem Networking Win2000 Computers
Thanks, 98 and Hot-Text for the tips and good info about the other newsgroups.
I'm afraid I am to blame for this one. I had misspelled the name of the network on one of the computers. Once that was corrected, everything was already connected. Now have both machines connecting and a printer all working fine. Reminds me of one time I was called out to repair some equipment that was "dead." I drove a couple of hours to the site, walked in, plugged it, turned it on and left. Now I know what it's like to be on the other end! LOL! "Hot-Text" wrote in message ... "Guv Bob" wrote in message m... I would appreciate any suggestions from the gurus here as to how I can get my two Win2000Prof computer talking to each other via Netgear WGR614 router. I had one 2000Prof and one 98SE networked and both worked fine. Recently I installed 2000Prof on the 98SE and now cannot get them to communicate. Both can see the other computer, but neither one can access the other. The sharing, etc., is all set up like before. All drivers are installed and working except this one... PCI Simple Communications Controller PCI\VEN_1106&DEV_3068&SUBSYS_4C211543&REV_80\3&61A AA01&0&8E 28 I have downloaded and tried installing each of these drivers with no success... VIA Rhine Family Driver, Dated: 10-Aug-2009 Download version 3.84A OS supported Windows 2000, Windows ME, Windows 98, Windows 95, Windows 98SE, Windows NT Chips supported VT8251 Integrated, VT8231, VT8233, VT8235 & VT8237 Integrated (Rhine & Rhine II), VT6103 Rhine (PHY), VT6105/L/LOM and VT6106/H/L/S series (Rhine III), VT6105M Management Fast Ethernet Controller (Rhine III), VT6115 Fast Ethernet Controller (Rhine III), VT6107 Fast Ethernet Controller (Rhine & Rhine II) Notes This driver supports 32 and 64 bit operating systems. VIA Rhine Family Driver, Dated: 29-Jan-2009 Download version 1.14 OS supported Windows 98SE, Windows 95, Windows 98, Windows 2000, Windows ME Chips supported VT8251 Integrated, VT8231, VT8233, VT8235 & VT8237 Integrated (Rhine & Rhine II), VT6103 Rhine (PHY), VT6105/L/LOM and VT6106/H/L/S series (Rhine III), VT6105M Management Fast Ethernet Controller (Rhine III), VT6115 Fast Ethernet Controller (Rhine III), VT6107 Fast Ethernet Controller (Rhine & Rhine II) That's it -- any help would be greatly appreciated. Meanwhile, I'm off to buy more CD's for swapping data. LOL!! Thanks in advance! ReSet 98 In Windows 98 Click Start Go to Settings Click on Control Panel Click Network Tab Configuration Click on File and Print Sharing... Check I Want to be able to give others access to my files I Want to be able to allow other to my printer Click OK Now Click on Tab Identification You see Workgroup it have to be name the same as your Workgroup in Windows 2000 Now Click OK Win-98 will need to reboot After Reboot Go to a Folders that you like to Share Exp: C:\My Music when in the Folder Right Hand Click Click on Properties Click on Tab Sharing Click Shared As Access Type Click Full Click Apply Click OK if it all the PC you like to Share in C:\ do the same as the Exp... On it will work at the Win-2000 side For Windows 2000 Reset it too Bob If you need more help goto::::@ giganews Newsgroup 24hoursupport.helpdesk |
Problem Networking Win2000 Computers
"Guv Bob" wrote in message
... Thanks, 98 and Hot-Text for the tips and good info about the other newsgroups. I'm afraid I am to blame for this one. I had misspelled the name of the network on one of the computers. Once that was corrected, everything was already connected. Now have both machines connecting and a printer all working fine. Reminds me of one time I was called out to repair some equipment that was "dead." I drove a couple of hours to the site, walked in, plugged it, turned it on and left. Now I know what it's like to be on the other end! LOL! Good to it you up and run Have a good day |
All times are GMT +1. The time now is 11:54 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Win98Banter.com