Win98banter

Win98banter (http://www.win98banter.com/index.php)
-   Setup & Installation (http://www.win98banter.com/forumdisplay.php?f=14)
-   -   MS Solution4 Modem, No solution Tapi Problem (http://www.win98banter.com/showthread.php?t=31937)

Spajky October 27th 05 12:22 PM

MS Solution4 Modem, No solution Tapi Problem
 
On Mon, 24 Oct 2005 17:45:54 -0700, crazyjoepunter
wrote:

This is a question for tapi/dun/modem sexperts ;-)

cannot get dun to work with aztech mdp3880-w(u) modem.

installed latest drivers, install went fine. "more info" reported info
from the modem.

When I try to dialout using dun i get : "error 633- modem is not
installed or configured for dialup, double click on the modems icon in
control panel"

When I do the above, it tries to reinstall the modem drivers,even though
they have already been installed.

Tried MS's solution and rebuilt telephon.ini, still no go. Also
did their registry fix for telephon.ini

tried uninstalling and reinstalling drivers and modem still no problem.
Modem now assigned to com3 IRQ 10 Everytime I try to dialup win98 wants
me to reinstall the drivers which have already been succesfully
installed. This is probably a problem with the registry, since that is
the cause of so many problems with win98


if is internal one,
deinstall modem drivers & reinstall them under Networking & not under
Modems when Win detects a connected device during reboot .. may help
--
Regards , SPAJKY ®
mail addr. @ my site @ http://www.spajky.vze.com
"Tualatin OC-ed / BX-Slot1 / inaudible setup!"

charles bridges October 27th 05 10:24 PM

MS Solution4 Modem, No solution Tapi Problem
 
Hey Spajky

I am having the same problem. Will not recognize modem regardless of what I
do. Finally hooked up a USB modem and it works fine, but I would rather
use my internal modem.
Could you explain in a little more detail what you mean when you say
"reinstall drivers & reinstall them under Networking & not under Modems".
Thanks
Charles

"Spajky" wrote in message
...
On Mon, 24 Oct 2005 17:45:54 -0700, crazyjoepunter
wrote:

This is a question for tapi/dun/modem sexperts ;-)

cannot get dun to work with aztech mdp3880-w(u) modem.

installed latest drivers, install went fine. "more info" reported info
from the modem.

When I try to dialout using dun i get : "error 633- modem is not
installed or configured for dialup, double click on the modems icon in
control panel"

When I do the above, it tries to reinstall the modem drivers,even though
they have already been installed.

Tried MS's solution and rebuilt telephon.ini, still no go. Also
did their registry fix for telephon.ini

tried uninstalling and reinstalling drivers and modem still no problem.
Modem now assigned to com3 IRQ 10 Everytime I try to dialup win98 wants
me to reinstall the drivers which have already been succesfully
installed. This is probably a problem with the registry, since that is
the cause of so many problems with win98


if is internal one,
deinstall modem drivers & reinstall them under Networking & not under
Modems when Win detects a connected device during reboot .. may help
--
Regards , SPAJKY ®
mail addr. @ my site @ http://www.spajky.vze.com
"Tualatin OC-ed / BX-Slot1 / inaudible setup!"




crazyjoepunter_invalid October 28th 05 08:36 AM

MS Solution4 Modem, No solution Tapi Problem
 
on Thu 27 Oct 2005 04:22:00a, Spajky wrote in
:

On Mon, 24 Oct 2005 17:45:54 -0700, crazyjoepunter
wrote:

This is a question for tapi/dun/modem sexperts ;-)

cannot get dun to work with aztech mdp3880-w(u) modem.

installed latest drivers, install went fine. "more info"
reported info from the modem.

When I try to dialout using dun i get : "error 633- modem is not
installed or configured for dialup, double click on the modems
icon in control panel"

When I do the above, it tries to reinstall the modem
drivers,even though they have already been installed.

Tried MS's solution and rebuilt telephon.ini, still no go. Also
did their registry fix for telephon.ini

tried uninstalling and reinstalling drivers and modem still no
problem. Modem now assigned to com3 IRQ 10 Everytime I try to
dialup win98 wants me to reinstall the drivers which have
already been succesfully installed. This is probably a problem
with the registry, since that is the cause of so many problems
with win98


if is internal one,
deinstall modem drivers & reinstall them under Networking & not
under Modems when Win detects a connected device during reboot
.. may help


Sorry I am not an expert in this area. Do you have a procedure for
this? And why is it supposed to work. Networking is for installing
tcp/ip stack not modems, I thought. Others have had this problem
and tried reinstalling dun with no effect.


Spajky October 28th 05 09:49 AM

MS Solution4 Modem, No solution Tapi Problem
 
On Thu, 27 Oct 2005 17:24:44 -0400, "charles bridges"
wrote:

I am having the same problem.


Could you explain in a little more detail what you mean when you say
"reinstall drivers & reinstall them under Networking & not under Modems".


Don´t let Win search U 4 new device drivers when Add New HW is chosen,
chose twice NO, go to Network adapters (2nd option is Other devices)
in list of hardware to install & chose Have disk & point it to the
path/place where you have the drivers for that your modem ...

Sometimes that cheap Win modems are picky to install properly & some
ISDN ones too ... May help, nothing else is to do than to try ...


--
Regards , SPAJKY ®
mail addr. @ my site @ http://www.spajky.vze.com
"Tualatin OC-ed / BX-Slot1 / inaudible setup!"


All times are GMT +1. The time now is 04:21 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Win98Banter.com