Win98banter

Win98banter (http://www.win98banter.com/index.php)
-   Setup & Installation (http://www.win98banter.com/forumdisplay.php?f=14)
-   -   Whats this mean (http://www.win98banter.com/showthread.php?t=44806)

Pat[_2_] October 25th 08 07:11 PM

Whats this mean
 
Hi,

I receive the following after WIN 98 setup during plug and play components
setup.
Fatal exception OD at 0028:FF041E68 in VXD acpi(OC) * 00003358

Thanks
Pat


philo October 25th 08 11:36 PM

Whats this mean
 

"Pat" wrote in message
...
Hi,

I receive the following after WIN 98 setup during plug and play

components
setup.
Fatal exception OD at 0028:FF041E68 in VXD acpi(OC) * 00003358

Thanks
Pat



It is a hardware error of some type.
either defective hardware or a conflict.

Try removing all essential hardware and try running setup again


Other things to try:


Run a RAM test

try setting the bios to defaults



philo October 25th 08 11:36 PM

Whats this mean
 

"Pat" wrote in message
...
Hi,

I receive the following after WIN 98 setup during plug and play

components
setup.
Fatal exception OD at 0028:FF041E68 in VXD acpi(OC) * 00003358

Thanks
Pat



It is a hardware error of some type.
either defective hardware or a conflict.

Try removing all essential hardware and try running setup again


Other things to try:


Run a RAM test

try setting the bios to defaults



Pat[_2_] October 27th 08 03:55 PM

Whats this mean
 
Set the bios to its defaluts disconnected network card phone modem both cd's
still get the same message.


I receive the following after WIN 98 setup during plug and play

components
setup.
Fatal exception OD at 0028:FF041E68 in VXD acpi(OC) * 00003358

Thanks
Pat



It is a hardware error of some type.
either defective hardware or a conflict.

Try removing all essential hardware and try running setup again


Other things to try:


Run a RAM test

try setting the bios to defaults




Pat[_2_] October 27th 08 03:55 PM

Whats this mean
 
Set the bios to its defaluts disconnected network card phone modem both cd's
still get the same message.


I receive the following after WIN 98 setup during plug and play

components
setup.
Fatal exception OD at 0028:FF041E68 in VXD acpi(OC) * 00003358

Thanks
Pat



It is a hardware error of some type.
either defective hardware or a conflict.

Try removing all essential hardware and try running setup again


Other things to try:


Run a RAM test

try setting the bios to defaults




philo October 28th 08 12:45 AM

Whats this mean
 

"Pat" wrote in message
...
Set the bios to its defaluts disconnected network card phone modem both

cd's
still get the same message.


I receive the following after WIN 98 setup during plug and play

components
setup.
Fatal exception OD at 0028:FF041E68 in VXD acpi(OC) * 00003358

Thanks
Pat



It is a hardware error of some type.
either defective hardware or a conflict.

Try removing all essential hardware and try running setup again


Other things to try:


Run a RAM test

try setting the bios to defaults




see this
http://oca.microsoft.com/en/windiag.asp

you should run a RAM test
and if any faults are found, the RAM should be replaced

the test should be run for at least several hours...
but may of course be stopped with the first error found

otherwise just go ahead and try different RAM that's known to bo good



philo October 28th 08 12:45 AM

Whats this mean
 

"Pat" wrote in message
...
Set the bios to its defaluts disconnected network card phone modem both

cd's
still get the same message.


I receive the following after WIN 98 setup during plug and play

components
setup.
Fatal exception OD at 0028:FF041E68 in VXD acpi(OC) * 00003358

Thanks
Pat



It is a hardware error of some type.
either defective hardware or a conflict.

Try removing all essential hardware and try running setup again


Other things to try:


Run a RAM test

try setting the bios to defaults




see this
http://oca.microsoft.com/en/windiag.asp

you should run a RAM test
and if any faults are found, the RAM should be replaced

the test should be run for at least several hours...
but may of course be stopped with the first error found

otherwise just go ahead and try different RAM that's known to bo good




All times are GMT +1. The time now is 03:10 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Win98Banter.com