Enable Caller ID
 

How can I enable caller ID feature of my Modem. I have tried different
programs (IVM, Bitware, Phone Tray) but no one is displaying this. Though
the regular phone attached to modem displays this.

Does my modem supports this? for this question I have extracted the
following from modem's manual:
____________________________________
command= +VCID=n
default= 0
description= Caller ID Selection

This command controls the reporting and presentation of data in the ICLID
(Incoming Call
Line ID) data format used by the Caller ID services in the United States
and Canada. At a minimum, the data sent to the DCE includes the date, time,
and the caller's telephone number. Caller ID information is sent to the DTE
during the first and second ring signals when the modem is in voice, data,
or fax mode.

n = 0 Disables Caller ID
n = 1 Enables Caller ID with formatted presentation to the DTE. The modem
presents the data items in a TagValue pair format. The expected pairs
are data, time, caller code (phone number), and name.
n = 2 Enables Caller ID with unformatted presentation to the DTE. The modem
presents the entire packet of information, excluding the leading U's, in
ASCII-printable hex numbers.
NOTE: If S0=1 (auto-answer mode) and Caller ID is enabled in data modem
mode, then the modem answers only after the second ring signal.
________________________________________

Which makes me believe it does supports Caller ID. Also how can I run the
above command and other commands mentioned in manual.

One more thing I am neither in US nor in Cananda.


Thanks

--

Farhan