Win98banter

Win98banter (http://www.win98banter.com/index.php)
-   Networking (http://www.win98banter.com/forumdisplay.php?f=10)
-   -   Problem Networking Win2000 Computers (http://www.win98banter.com/showthread.php?t=52023)

Guv Bob[_2_] August 1st 13 09:07 PM

Problem Networking Win2000 Computers
 
I would appreciate any suggestions from the gurus here as to how I can get my two Win2000Prof computer talking to each other via Netgear WGR614 router.

I had one 2000Prof and one 98SE networked and both worked fine. Recently I installed 2000Prof on the 98SE and now cannot get them to communicate.

Both can see the other computer, but neither one can access the other. The sharing, etc., is all set up like before.

All drivers are installed and working except this one...

PCI Simple Communications Controller
PCI\VEN_1106&DEV_3068&SUBSYS_4C211543&REV_80\3&61A AA01&0&8E 28

I have downloaded and tried installing each of these drivers with no success...

VIA Rhine Family Driver, Dated: 10-Aug-2009
Download version 3.84A OS supported Windows 2000, Windows ME, Windows 98, Windows 95, Windows 98SE, Windows NT Chips supported VT8251 Integrated, VT8231, VT8233, VT8235 & VT8237 Integrated (Rhine & Rhine II), VT6103 Rhine (PHY), VT6105/L/LOM and VT6106/H/L/S series (Rhine III), VT6105M Management Fast Ethernet Controller (Rhine III), VT6115 Fast Ethernet Controller (Rhine III), VT6107 Fast Ethernet Controller (Rhine & Rhine II) Notes This driver supports 32 and 64 bit operating systems.

VIA Rhine Family Driver, Dated: 29-Jan-2009
Download version 1.14 OS supported Windows 98SE, Windows 95, Windows 98, Windows 2000, Windows ME Chips supported VT8251 Integrated, VT8231, VT8233, VT8235 & VT8237 Integrated (Rhine & Rhine II), VT6103 Rhine (PHY), VT6105/L/LOM and VT6106/H/L/S series (Rhine III), VT6105M Management Fast Ethernet Controller (Rhine III), VT6115 Fast Ethernet Controller (Rhine III), VT6107 Fast Ethernet Controller (Rhine & Rhine II)

That's it -- any help would be greatly appreciated. Meanwhile, I'm off to buy more CD's for swapping data. LOL!!

Thanks in advance!

Bob





98 Guy August 3rd 13 02:40 AM

Problem Networking Win2000 Computers
 
Guv Bob wrote:

I would appreciate any suggestions from the gurus here as to how
I can get my two Win2000Prof computer talking to each other via
Netgear WGR614 router.


You should have checked the activity of this newsgroup
(microsoft.public.win98.networking) first before posting a question to
it.

You would have seen it hasn't had any activity for months - if not
years.

I have added a more active win-98 group
(microsoft.public.win98.gen_discussion) to my reply.

I'm guessing that you've probably multi-posted your question to one or
more win-2k groups (but I won't bother to check on that).

I had one 2000Prof and one 98SE networked and both worked fine.
Recently I installed 2000Prof on the 98SE and now cannot get them to
communicate.

Both can see the other computer, but neither one can access the other.


Can either computer ping the other?

Can both computers surf the web?

If the answer to both questions is yes, then it's a sharing /
permissions thing going on.

Could also be a protocal-binding issue.

Hot-Text August 3rd 13 07:16 PM

Problem Networking Win2000 Computers
 
"Guv Bob" wrote in message
m...
I would appreciate any suggestions from the gurus here as to how I can get
my two Win2000Prof computer talking to each other via Netgear WGR614
router.
I had one 2000Prof and one 98SE networked and both worked fine. Recently
I installed 2000Prof on the 98SE and now cannot get them to communicate.
Both can see the other computer, but neither one can access the other. The
sharing, etc., is all set up like before.
All drivers are installed and working except this one...
PCI Simple Communications Controller
PCI\VEN_1106&DEV_3068&SUBSYS_4C211543&REV_80\3&61A AA01&0&8E 28
I have downloaded and tried installing each of these drivers with no
success...
VIA Rhine Family Driver, Dated: 10-Aug-2009
Download version 3.84A OS supported Windows 2000, Windows ME, Windows 98,
Windows 95, Windows 98SE, Windows NT Chips supported VT8251 Integrated,
VT8231, VT8233, VT8235 & VT8237 Integrated (Rhine & Rhine II), VT6103
Rhine (PHY), VT6105/L/LOM and VT6106/H/L/S series (Rhine III), VT6105M
Management Fast Ethernet Controller (Rhine III), VT6115 Fast Ethernet
Controller (Rhine III), VT6107 Fast Ethernet Controller (Rhine & Rhine II)
Notes This driver supports 32 and 64 bit operating systems.
VIA Rhine Family Driver, Dated: 29-Jan-2009
Download version 1.14 OS supported Windows 98SE, Windows 95, Windows 98,
Windows 2000, Windows ME Chips supported VT8251 Integrated, VT8231,
VT8233, VT8235 & VT8237 Integrated (Rhine & Rhine II), VT6103 Rhine (PHY),
VT6105/L/LOM and VT6106/H/L/S series (Rhine III), VT6105M Management Fast
Ethernet Controller (Rhine III), VT6115 Fast Ethernet Controller (Rhine
III), VT6107 Fast Ethernet Controller (Rhine & Rhine II)
That's it -- any help would be greatly appreciated. Meanwhile, I'm off to
buy more CD's for swapping data. LOL!!
Thanks in advance!


ReSet 98

In Windows 98
Click Start
Go to Settings
Click on Control Panel
Click Network

Tab Configuration
Click on
File and Print Sharing...
Check
I Want to be able to give others access to my files
I Want to be able to allow other to my printer
Click OK

Now Click on Tab
Identification

You see Workgroup
it have to be name the same
as your Workgroup in
Windows 2000

Now Click OK
Win-98 will need to reboot


After Reboot

Go to a Folders
that you like to Share

Exp:
C:\My Music
when in the Folder
Right Hand Click
Click on Properties
Click on Tab Sharing
Click Shared As
Access Type
Click Full
Click Apply
Click OK

if it all the PC you like to Share
in C:\
do the same as the Exp...

On it will work at the Win-2000 side

For Windows 2000
Reset it too

Bob
If you need more help
goto::::@ giganews Newsgroup

24hoursupport.helpdesk


Guv Bob[_2_] August 5th 13 04:53 PM

Problem Networking Win2000 Computers
 
Thanks, 98 and Hot-Text for the tips and good info about the other newsgroups.

I'm afraid I am to blame for this one. I had misspelled the name of the network on one of the computers. Once that was corrected, everything was already connected. Now have both machines connecting and a printer all working fine.

Reminds me of one time I was called out to repair some equipment that was "dead." I drove a couple of hours to the site, walked in, plugged it, turned it on and left.

Now I know what it's like to be on the other end! LOL!


"Hot-Text" wrote in message ...
"Guv Bob" wrote in message
m...
I would appreciate any suggestions from the gurus here as to how I can get
my two Win2000Prof computer talking to each other via Netgear WGR614
router.
I had one 2000Prof and one 98SE networked and both worked fine. Recently
I installed 2000Prof on the 98SE and now cannot get them to communicate.
Both can see the other computer, but neither one can access the other. The
sharing, etc., is all set up like before.
All drivers are installed and working except this one...
PCI Simple Communications Controller
PCI\VEN_1106&DEV_3068&SUBSYS_4C211543&REV_80\3&61A AA01&0&8E 28
I have downloaded and tried installing each of these drivers with no
success...
VIA Rhine Family Driver, Dated: 10-Aug-2009
Download version 3.84A OS supported Windows 2000, Windows ME, Windows 98,
Windows 95, Windows 98SE, Windows NT Chips supported VT8251 Integrated,
VT8231, VT8233, VT8235 & VT8237 Integrated (Rhine & Rhine II), VT6103
Rhine (PHY), VT6105/L/LOM and VT6106/H/L/S series (Rhine III), VT6105M
Management Fast Ethernet Controller (Rhine III), VT6115 Fast Ethernet
Controller (Rhine III), VT6107 Fast Ethernet Controller (Rhine & Rhine II)
Notes This driver supports 32 and 64 bit operating systems.
VIA Rhine Family Driver, Dated: 29-Jan-2009
Download version 1.14 OS supported Windows 98SE, Windows 95, Windows 98,
Windows 2000, Windows ME Chips supported VT8251 Integrated, VT8231,
VT8233, VT8235 & VT8237 Integrated (Rhine & Rhine II), VT6103 Rhine (PHY),
VT6105/L/LOM and VT6106/H/L/S series (Rhine III), VT6105M Management Fast
Ethernet Controller (Rhine III), VT6115 Fast Ethernet Controller (Rhine
III), VT6107 Fast Ethernet Controller (Rhine & Rhine II)
That's it -- any help would be greatly appreciated. Meanwhile, I'm off to
buy more CD's for swapping data. LOL!!
Thanks in advance!


ReSet 98

In Windows 98
Click Start
Go to Settings
Click on Control Panel
Click Network

Tab Configuration
Click on
File and Print Sharing...
Check
I Want to be able to give others access to my files
I Want to be able to allow other to my printer
Click OK

Now Click on Tab
Identification

You see Workgroup
it have to be name the same
as your Workgroup in
Windows 2000

Now Click OK
Win-98 will need to reboot


After Reboot

Go to a Folders
that you like to Share

Exp:
C:\My Music
when in the Folder
Right Hand Click
Click on Properties
Click on Tab Sharing
Click Shared As
Access Type
Click Full
Click Apply
Click OK

if it all the PC you like to Share
in C:\
do the same as the Exp...

On it will work at the Win-2000 side

For Windows 2000
Reset it too

Bob
If you need more help
goto::::@ giganews Newsgroup

24hoursupport.helpdesk


Hot-Text August 6th 13 01:50 AM

Problem Networking Win2000 Computers
 
"Guv Bob" wrote in message
...
Thanks, 98 and Hot-Text for the tips and good info about the other
newsgroups.
I'm afraid I am to blame for this one. I had misspelled the name of the
network on one of the computers. Once that was corrected, everything was
already connected. Now have both machines connecting and a printer all
working fine.
Reminds me of one time I was called out to repair some equipment that was
"dead." I drove a couple of hours to the site, walked in, plugged it,
turned it on and left.
Now I know what it's like to be on the other end! LOL!


Good to it you up and run
Have a good day



All times are GMT +1. The time now is 12:12 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Win98Banter.com