Win98banter

Win98banter (http://www.win98banter.com/index.php)
-   Monitors & Displays (http://www.win98banter.com/forumdisplay.php?f=18)
-   -   problem with image on screen (http://www.win98banter.com/showthread.php?t=18658)

Cheri October 6th 04 11:35 AM

problem with image on screen
 
Sure hope someone can help me. The Image that comes on my
screen on start up looks as if it is on safe mode, but is
not. have even used back up to try and restore since
system restore didnt help. Went to download Scanner
application that quit working and disapeared somewhere in
my comp and had to ctrl+alt+del because download for
scanner wouldnt finish loading , now my screen's picture
is large and faded as if on safe mode, but is not safe
mode.
Cheri

Mart October 6th 04 12:30 PM

Sounds like your Display Adapter driver is no longer being properly
recognised, is incorrectly set-up, or is corrupted.

Boot into Safe Mode and in Device Manager, 'Remove' any/all Display Adapters
and Monitors and then re-boot. WinMe *should* re-detect (Plug&Play) your
video card and monitor and then should install the 'correct' drivers.

If it still doesn't help, you'll need to install the latest WinMe driver for
your Video Card (Adapter) which you should be available to download from the
card manufacturers web site.

HTH and good luck

Mart


"Cheri" wrote in message
...
Sure hope someone can help me. The Image that comes on my
screen on start up looks as if it is on safe mode, but is
not. have even used back up to try and restore since
system restore didnt help. Went to download Scanner
application that quit working and disapeared somewhere in
my comp and had to ctrl+alt+del because download for
scanner wouldnt finish loading , now my screen's picture
is large and faded as if on safe mode, but is not safe
mode.
Cheri




JBB October 6th 04 08:28 PM

Cheri,
look up EXPANDED SCREEN (below) and follow Noel's advice
-----Original Message-----
Sounds like your Display Adapter driver is no longer

being properly
recognised, is incorrectly set-up, or is corrupted.

Boot into Safe Mode and in Device Manager, 'Remove'

any/all Display Adapters
and Monitors and then re-boot. WinMe *should* re-detect

(Plug&Play) your
video card and monitor and then should install

the 'correct' drivers.

If it still doesn't help, you'll need to install the

latest WinMe driver for
your Video Card (Adapter) which you should be available

to download from the
card manufacturers web site.

HTH and good luck

Mart


"Cheri" wrote in

message
...
Sure hope someone can help me. The Image that comes on

my
screen on start up looks as if it is on safe mode, but

is
not. have even used back up to try and restore since
system restore didnt help. Went to download Scanner
application that quit working and disapeared somewhere

in
my comp and had to ctrl+alt+del because download for
scanner wouldnt finish loading , now my screen's picture
is large and faded as if on safe mode, but is not safe
mode.
Cheri



.


Noel Paton October 6th 04 09:19 PM

Duh?? - that makes no sense that I can see?? -or have I just had one too
many???
Ah - I see now - you're referring to the advice I gave John.
Fortunately Mart has already posted quite adequate advice to the OP - which
hopefully will do the trick.
(now to respond to John, who I'd almost forgotten about!)

--
Noel Paton (MS-MVP 2002-2005, Windows)

Nil Carborundum Illegitemi
http://www.btinternet.com/~winnoel/millsrpch.htm
http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's

"JBB" wrote in message
...
Cheri,
look up EXPANDED SCREEN (below) and follow Noel's advice





All times are GMT +1. The time now is 08:15 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Win98Banter.com