|
HDD install not detected
I am trying to install a new replacement HDD in my boy's PC (PIII 333MHz,
Win98--yeah, it's old). I have a Seagate 80GB replacement HDD. After a couple of tries and some cable swaps, I got the machine to boot back up from the motherboard, but it will not detect the new HDD. It won't even boot from my Windows staretup disk. I have all the BIOS settings as per the instructions with the drive. BUT, when I try to get the PC to auto-detect the HDD, it stalls at "Auto-detecting new primary master" and that's it. I can't even back out of it; it completely freezes and I have to power the PC off. Any ideas? Thanks. :-| |
HDD install not detected
Some simple questions:
Is the harddrive cables properly installed ?? Is the hard drive jumper set properly Does the motherboard bios support drives this size. Back in the old days there were motherboards with 2G limits, 8 G limits and 32 G limits -- Jon Hildrum DTS MVP www.hildrum.com "Chuck" wrote in message ... I am trying to install a new replacement HDD in my boy's PC (PIII 333MHz, Win98--yeah, it's old). I have a Seagate 80GB replacement HDD. After a couple of tries and some cable swaps, I got the machine to boot back up from the motherboard, but it will not detect the new HDD. It won't even boot from my Windows staretup disk. I have all the BIOS settings as per the instructions with the drive. BUT, when I try to get the PC to auto-detect the HDD, it stalls at "Auto-detecting new primary master" and that's it. I can't even back out of it; it completely freezes and I have to power the PC off. Any ideas? Thanks. :-| |
HDD install not detected
Yes
Yes Don't know. it was my understanding that even if all that was old, it should still recognize the drive, just as smaller than its actual capacity, which could then be remedied with a patch. "Jon_Hildrum" wrote: Some simple questions: Is the harddrive cables properly installed ?? Is the hard drive jumper set properly Does the motherboard bios support drives this size. Back in the old days there were motherboards with 2G limits, 8 G limits and 32 G limits -- Jon Hildrum DTS MVP www.hildrum.com "Chuck" wrote in message ... I am trying to install a new replacement HDD in my boy's PC (PIII 333MHz, Win98--yeah, it's old). I have a Seagate 80GB replacement HDD. After a couple of tries and some cable swaps, I got the machine to boot back up from the motherboard, but it will not detect the new HDD. It won't even boot from my Windows staretup disk. I have all the BIOS settings as per the instructions with the drive. BUT, when I try to get the PC to auto-detect the HDD, it stalls at "Auto-detecting new primary master" and that's it. I can't even back out of it; it completely freezes and I have to power the PC off. Any ideas? Thanks. :-| |
HDD install not detected
Seagate has installation tools available for download.
http://www.seagate.com/support/disc/...s/discwiz.html Ben "Chuck" wrote in message ... I am trying to install a new replacement HDD in my boy's PC (PIII 333MHz, Win98--yeah, it's old). I have a Seagate 80GB replacement HDD. After a couple of tries and some cable swaps, I got the machine to boot back up from the motherboard, but it will not detect the new HDD. It won't even boot from my Windows staretup disk. I have all the BIOS settings as per the instructions with the drive. BUT, when I try to get the PC to auto-detect the HDD, it stalls at "Auto-detecting new primary master" and that's it. I can't even back out of it; it completely freezes and I have to power the PC off. Any ideas? Thanks. :-| |
HDD install not detected
It came with a CD, but the PC won't get past the initial memory check. This
is a brand new blank drive, and there is not other drive in the PC. The one I had was bad, and this is a replacement. It won't even boot with the Startup disk so I can get CDROM support. ??? "Ben Myers" wrote: Seagate has installation tools available for download. http://www.seagate.com/support/disc/...s/discwiz.html Ben "Chuck" wrote in message ... I am trying to install a new replacement HDD in my boy's PC (PIII 333MHz, Win98--yeah, it's old). I have a Seagate 80GB replacement HDD. After a couple of tries and some cable swaps, I got the machine to boot back up from the motherboard, but it will not detect the new HDD. It won't even boot from my Windows staretup disk. I have all the BIOS settings as per the instructions with the drive. BUT, when I try to get the PC to auto-detect the HDD, it stalls at "Auto-detecting new primary master" and that's it. I can't even back out of it; it completely freezes and I have to power the PC off. Any ideas? Thanks. :-| |
HDD install not detected
Go into the BIOS setup and make sure the boot sequence is set
properly. I don't know if the CD that came with the disk is bootable. If not, set the boot sequence to "A:,C:". Be sure to save the change when exiting. Ben .. "Chuck" wrote in message ... It came with a CD, but the PC won't get past the initial memory check. This is a brand new blank drive, and there is not other drive in the PC. The one I had was bad, and this is a replacement. It won't even boot with the Startup disk so I can get CDROM support. ??? "Ben Myers" wrote: Seagate has installation tools available for download. http://www.seagate.com/support/disc/...s/discwiz.html Ben "Chuck" wrote in message ... I am trying to install a new replacement HDD in my boy's PC (PIII 333MHz, Win98--yeah, it's old). I have a Seagate 80GB replacement HDD. After a couple of tries and some cable swaps, I got the machine to boot back up from the motherboard, but it will not detect the new HDD. It won't even boot from my Windows staretup disk. I have all the BIOS settings as per the instructions with the drive. BUT, when I try to get the PC to auto-detect the HDD, it stalls at "Auto-detecting new primary master" and that's it. I can't even back out of it; it completely freezes and I have to power the PC off. Any ideas? Thanks. :-| |
HDD install not detected
So maybe it wasn't the HDD that went bad, but rather the controller? Or
perhaps the power isn't good and that caused the old drive to go bad and prevents the new one from behaving? Just thinking out loud... -- Gary S. Terhune MS MVP Shell/User "Chuck" wrote in message ... It came with a CD, but the PC won't get past the initial memory check. This is a brand new blank drive, and there is not other drive in the PC. The one I had was bad, and this is a replacement. It won't even boot with the Startup disk so I can get CDROM support. ??? "Ben Myers" wrote: Seagate has installation tools available for download. http://www.seagate.com/support/disc/...s/discwiz.html Ben "Chuck" wrote in message ... I am trying to install a new replacement HDD in my boy's PC (PIII 333MHz, Win98--yeah, it's old). I have a Seagate 80GB replacement HDD. After a couple of tries and some cable swaps, I got the machine to boot back up from the motherboard, but it will not detect the new HDD. It won't even boot from my Windows staretup disk. I have all the BIOS settings as per the instructions with the drive. BUT, when I try to get the PC to auto-detect the HDD, it stalls at "Auto-detecting new primary master" and that's it. I can't even back out of it; it completely freezes and I have to power the PC off. Any ideas? Thanks. :-| |
HDD install not detected
On Tue, 21 Feb 2006 13:45:27 -0800, "Chuck"
wrote: I am trying to install a new replacement HDD in my boy's PC (PIII 333MHz, Win98--yeah, it's old). I have a Seagate 80GB replacement HDD. After a couple of tries and some cable swaps, I got the machine to boot back up from the motherboard, but it will not detect the new HDD. It won't even boot from my Windows staretup disk. Older Award BIOSes have a disk size limit. It used to be 34GB and then 65GB. If such a BIOS tries to detect a larger disk it aborts with a division overflow. Can you check if there is a BIOS update available ? Check the mainboard manufacturer's site. -- Steven |
HDD install not detected
I think it's an ASUS board. But even if one exists, how do I install it w/o
the ability to boot up? "Steven" wrote: On Tue, 21 Feb 2006 13:45:27 -0800, "Chuck" wrote: I am trying to install a new replacement HDD in my boy's PC (PIII 333MHz, Win98--yeah, it's old). I have a Seagate 80GB replacement HDD. After a couple of tries and some cable swaps, I got the machine to boot back up from the motherboard, but it will not detect the new HDD. It won't even boot from my Windows staretup disk. Older Award BIOSes have a disk size limit. It used to be 34GB and then 65GB. If such a BIOS tries to detect a larger disk it aborts with a division overflow. Can you check if there is a BIOS update available ? Check the mainboard manufacturer's site. -- Steven |
HDD install not detected
Could be. No idea how to check. My PC won't complete a boot with the old HDD.
Powers up OK tho'. "Gary S. Terhune" wrote: So maybe it wasn't the HDD that went bad, but rather the controller? Or perhaps the power isn't good and that caused the old drive to go bad and prevents the new one from behaving? Just thinking out loud... -- Gary S. Terhune MS MVP Shell/User "Chuck" wrote in message ... It came with a CD, but the PC won't get past the initial memory check. This is a brand new blank drive, and there is not other drive in the PC. The one I had was bad, and this is a replacement. It won't even boot with the Startup disk so I can get CDROM support. ??? "Ben Myers" wrote: Seagate has installation tools available for download. http://www.seagate.com/support/disc/...s/discwiz.html Ben "Chuck" wrote in message ... I am trying to install a new replacement HDD in my boy's PC (PIII 333MHz, Win98--yeah, it's old). I have a Seagate 80GB replacement HDD. After a couple of tries and some cable swaps, I got the machine to boot back up from the motherboard, but it will not detect the new HDD. It won't even boot from my Windows staretup disk. I have all the BIOS settings as per the instructions with the drive. BUT, when I try to get the PC to auto-detect the HDD, it stalls at "Auto-detecting new primary master" and that's it. I can't even back out of it; it completely freezes and I have to power the PC off. Any ideas? Thanks. :-| |
All times are GMT +1. The time now is 01:39 AM. |
|
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Win98Banter.com