Win98banter

Win98banter (http://www.win98banter.com/index.php)
-   Monitors & Displays (http://www.win98banter.com/forumdisplay.php?f=5)
-   -   Cannot get to 1024x768, 16M colours (http://www.win98banter.com/showthread.php?t=37423)

Ikke July 30th 06 11:29 PM

Cannot get to 1024x768, 16M colours
 
Hi everybody,

I've been given an old machine (PIII-500) to reinstall for a friend.

So far, I've installed Windows '98 Second Edition on the machine, but I
cannot seem to get the resolution of the screen to go up to 1024x768 at 16
million colours.

At the display settings screen, I can choose the resolution, and I've added
a Super VGA screen (standard driver), but whatever choice I make, it
defaults back to 640x480, 16 colours.

Now I know for a fact that the video card in the machine is an old Matrox
one, so I started fiddling around with some of the more popular Matrox
drivers, but to no avail.

As this is a second-hand machine, no driver CDs are available in any form,
so I'm down to my own collection of drivers, the Windows CD, and whatever
the Net seems to offer.

Is there anybody who can tell me how to get this resolution to my desired
settings?

Thanks,

Ikke

Ron Badour July 31st 06 10:33 AM

Cannot get to 1024x768, 16M colours
 
If the card was ever able to obtain that resolution, then you don't have the
right driver. Here's my standard blurb:

When the correct screen resolution (screen area) or the right number of
colors are not available choices in display properties, settings tab, then
it is a good bet you do not have the right driver installed for your display
adapter. The display adapter in your PC is either a video card or a display
chipset on the motherboard.

If you received a CD or floppy disks with drivers along with your PC, see if
they contain a display adapter driver and install it using: control panel,
system, device manager, display adapter.

If you know what display adapter your PC has but you have no disks, use
www.google.com to track down the correct driver on the internet.

If you do not know what display adapter your PC uses, you can go to a MS-DOS
prompt and type: Debug and hit enter. The screen will display a
flashing prompt next to a - sign. Type: DC000:35 (DC000:50 may also work)
and hit enter. The name and possibly model of your display adapter should
appear on the right hand side of the screen. To quit Debug, type Q and hit
enter. If Debug is not helpful, you can try this program: Aida32 available
from: http://www.aumha.org/free.htm Your final option is to remove the
computer case, look at where the monitor plugs into the back of the case and
then check that location inside the case. If there is a card there, you
have a video card and if there is a cable connected to the motherboard it is
on board graphics. Write down any information displayed on either the card
or the chipset on the motherboard. Then use www.google.com to search for
the information. Do not include all the data you found in one search
message--search on each piece individually. If you include all the
information at once, you might not get a hit.

I have found that a video card will generally have to be removed in order to
see the information. Be careful of static electricity as it can fry
components. Before touching anything in the computer case (the cord is
unplugged, right?), ground yourself to the case by touching it. Don't work
on carpeting since shuffling your feet on it can generate static electricity
after you grounded yourself. Remove the one screw that holds the card in
place and using a rocking motion (left to right and back), pull the card
straight out.

--
Regards


Ron Badour, MS MVP for W98
Tips: http://home.satx.rr.com/badour
Knowledge Base Info:
http://support.microsoft.com/default.aspx?pr=kbinfo



"Ikke" wrote in message
...
Hi everybody,

I've been given an old machine (PIII-500) to reinstall for a friend.

So far, I've installed Windows '98 Second Edition on the machine, but I
cannot seem to get the resolution of the screen to go up to 1024x768 at 16
million colours.

At the display settings screen, I can choose the resolution, and I've
added
a Super VGA screen (standard driver), but whatever choice I make, it
defaults back to 640x480, 16 colours.

Now I know for a fact that the video card in the machine is an old Matrox
one, so I started fiddling around with some of the more popular Matrox
drivers, but to no avail.

As this is a second-hand machine, no driver CDs are available in any form,
so I'm down to my own collection of drivers, the Windows CD, and whatever
the Net seems to offer.

Is there anybody who can tell me how to get this resolution to my desired
settings?

Thanks,

Ikke




Ikke July 31st 06 01:40 PM

Cannot get to 1024x768, 16M colours
 
"Ron Badour" wrote in
:

If the card was ever able to obtain that resolution, then you don't
have the right driver. Here's my standard blurb:

snipped information

The card was/is able to obtain that resolution, since this is a reinstall
of the machine. You were correct in stating that I did not have the right
drivers.

Thanks ever so much for your 'standard' blurb - I did not know about that
debug trick, which has solved my problem. I was able to identify the card
as a Matrox MGA G200, and luckily for me Matrox still offers old drivers
for download.

After installing the drivers, I was able to configure everything as
expected.

Thanks again, you've been a great help!

Ikke


All times are GMT +1. The time now is 11:23 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Win98Banter.com