Probs printing from WinME laptop (Error Code 0E:0028:C002BD0E)
 

Good afternoon.
Can somebody please help me. I have an Epson Stylus C46 printer installed on
my IBM laptop currently running with WinME. This weekend when I tried to
print something via usual USB port connection I got a blue screen saying: -
"An error has occured Error 0E:0028:C002BD0E Press any key to continue or
press Ctrl-Alt-Del to restart your computer".
If I press any key to continue my laptop hangs and if I reboot instead it
does not shut down properly. I do manage to get my laptop back up and running
again, but when I try to uninstall the printer with the aim of reinstalling
it again to correct this error, I actually get the same error message!!
I have searched the Microsoft website for hints on this error code, but
cannot find any. Can somebody tell me what I need to do step by step to
correct this error as I am a bit of a novice I'm afraid!! Many thanks and
regards, Steve B.

Probs printing from WinME laptop (Error Code 0E:0028:C002BD0E)
 

Such errors are usually caused by driver conflicts - often the Video
drivers....
try this:-
Reboot to Safe Mode
Open Device Manager
Remove ALL Display Adapters
Remove ALL Monitors
Reboot to Normal Mode - Windows will reinstall the required drivers -
hopefully curing your problem.



--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi
http://www.crashfixpc.com/millsrpch.htm

http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's
"Steve B." wrote in message
...
Good afternoon.
Can somebody please help me. I have an Epson Stylus C46 printer installed
on
my IBM laptop currently running with WinME. This weekend when I tried to
print something via usual USB port connection I got a blue screen
saying: -
"An error has occured Error 0E:0028:C002BD0E Press any key to continue or
press Ctrl-Alt-Del to restart your computer".
If I press any key to continue my laptop hangs and if I reboot instead it
does not shut down properly. I do manage to get my laptop back up and
running
again, but when I try to uninstall the printer with the aim of
reinstalling
it again to correct this error, I actually get the same error message!!
I have searched the Microsoft website for hints on this error code, but
cannot find any. Can somebody tell me what I need to do step by step to
correct this error as I am a bit of a novice I'm afraid!! Many thanks and
regards, Steve B.

Probs printing from WinME laptop (Error Code 0E:0028:C002BD0E)
 

Many thanks for that. I shall try it when I get home tonight (at work at the
moment). Can you tell me how to boot up my computer to run in Safe Mode when
I switch it on?

"Noel Paton" wrote:

Such errors are usually caused by driver conflicts - often the Video
drivers....
try this:-
Reboot to Safe Mode
Open Device Manager
Remove ALL Display Adapters
Remove ALL Monitors
Reboot to Normal Mode - Windows will reinstall the required drivers -
hopefully curing your problem.



--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi
http://www.crashfixpc.com/millsrpch.htm

http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's
"Steve B." wrote in message
...
Good afternoon.
Can somebody please help me. I have an Epson Stylus C46 printer installed
on
my IBM laptop currently running with WinME. This weekend when I tried to
print something via usual USB port connection I got a blue screen
saying: -
"An error has occured Error 0E:0028:C002BD0E Press any key to continue or
press Ctrl-Alt-Del to restart your computer".
If I press any key to continue my laptop hangs and if I reboot instead it
does not shut down properly. I do manage to get my laptop back up and
running
again, but when I try to uninstall the printer with the aim of
reinstalling
it again to correct this error, I actually get the same error message!!
I have searched the Microsoft website for hints on this error code, but
cannot find any. Can somebody tell me what I need to do step by step to
correct this error as I am a bit of a novice I'm afraid!! Many thanks and
regards, Steve B.

Probs printing from WinME laptop (Error Code 0E:0028:C002BD0E)
 

look here for instructions (they say it better than I can! :))
http://support.microsoft.com/kb/180902/
(Ignore Method 4 - it won't work in ME)
--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi
http://www.crashfixpc.com/millsrpch.htm

http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's
"Steve B." wrote in message
...
Many thanks for that. I shall try it when I get home tonight (at work at
the
moment). Can you tell me how to boot up my computer to run in Safe Mode
when
I switch it on?

"Noel Paton" wrote:

Such errors are usually caused by driver conflicts - often the Video
drivers....
try this:-
Reboot to Safe Mode
Open Device Manager
Remove ALL Display Adapters
Remove ALL Monitors
Reboot to Normal Mode - Windows will reinstall the required drivers -
hopefully curing your problem.



--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi
http://www.crashfixpc.com/millsrpch.htm

http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's
"Steve B." wrote in message
...
Good afternoon.
Can somebody please help me. I have an Epson Stylus C46 printer
installed
on
my IBM laptop currently running with WinME. This weekend when I tried
to
print something via usual USB port connection I got a blue screen
saying: -
"An error has occured Error 0E:0028:C002BD0E Press any key to continue
or
press Ctrl-Alt-Del to restart your computer".
If I press any key to continue my laptop hangs and if I reboot instead
it
does not shut down properly. I do manage to get my laptop back up and
running
again, but when I try to uninstall the printer with the aim of
reinstalling
it again to correct this error, I actually get the same error message!!
I have searched the Microsoft website for hints on this error code, but
cannot find any. Can somebody tell me what I need to do step by step to
correct this error as I am a bit of a novice I'm afraid!! Many thanks
and
regards, Steve B.

Probs printing from WinME laptop (Error Code 0E:0028:C002BD0E)
 

Many thanks for all your help Noel. I shall try it tonight and get back to
you guys if I have any further problems.

"Noel Paton" wrote:

look here for instructions (they say it better than I can! :))
http://support.microsoft.com/kb/180902/
(Ignore Method 4 - it won't work in ME)
--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi
http://www.crashfixpc.com/millsrpch.htm

http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's
"Steve B." wrote in message
...
Many thanks for that. I shall try it when I get home tonight (at work at
the
moment). Can you tell me how to boot up my computer to run in Safe Mode
when
I switch it on?

"Noel Paton" wrote:

Such errors are usually caused by driver conflicts - often the Video
drivers....
try this:-
Reboot to Safe Mode
Open Device Manager
Remove ALL Display Adapters
Remove ALL Monitors
Reboot to Normal Mode - Windows will reinstall the required drivers -
hopefully curing your problem.



--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi
http://www.crashfixpc.com/millsrpch.htm

http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's
"Steve B." wrote in message
...
Good afternoon.
Can somebody please help me. I have an Epson Stylus C46 printer
installed
on
my IBM laptop currently running with WinME. This weekend when I tried
to
print something via usual USB port connection I got a blue screen
saying: -
"An error has occured Error 0E:0028:C002BD0E Press any key to continue
or
press Ctrl-Alt-Del to restart your computer".
If I press any key to continue my laptop hangs and if I reboot instead
it
does not shut down properly. I do manage to get my laptop back up and
running
again, but when I try to uninstall the printer with the aim of
reinstalling
it again to correct this error, I actually get the same error message!!
I have searched the Microsoft website for hints on this error code, but
cannot find any. Can somebody tell me what I need to do step by step to
correct this error as I am a bit of a novice I'm afraid!! Many thanks
and
regards, Steve B.

Probs printing from WinME laptop (Error Code 0E:0028:C002BD0E)
 

Good Luck
--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi
http://www.crashfixpc.com/millsrpch.htm

http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's
"Steve B." wrote in message
...
Many thanks for all your help Noel. I shall try it tonight and get back to
you guys if I have any further problems.

"Noel Paton" wrote:

look here for instructions (they say it better than I can! :))
http://support.microsoft.com/kb/180902/
(Ignore Method 4 - it won't work in ME)
--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi
http://www.crashfixpc.com/millsrpch.htm

http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's
"Steve B." wrote in message
...
Many thanks for that. I shall try it when I get home tonight (at work
at
the
moment). Can you tell me how to boot up my computer to run in Safe Mode
when
I switch it on?

"Noel Paton" wrote:

Such errors are usually caused by driver conflicts - often the Video
drivers....
try this:-
Reboot to Safe Mode
Open Device Manager
Remove ALL Display Adapters
Remove ALL Monitors
Reboot to Normal Mode - Windows will reinstall the required drivers -
hopefully curing your problem.



--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi
http://www.crashfixpc.com/millsrpch.htm

http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages to
NG's
"Steve B." wrote in message
...
Good afternoon.
Can somebody please help me. I have an Epson Stylus C46 printer
installed
on
my IBM laptop currently running with WinME. This weekend when I
tried
to
print something via usual USB port connection I got a blue screen
saying: -
"An error has occured Error 0E:0028:C002BD0E Press any key to
continue
or
press Ctrl-Alt-Del to restart your computer".
If I press any key to continue my laptop hangs and if I reboot
instead
it
does not shut down properly. I do manage to get my laptop back up
and
running
again, but when I try to uninstall the printer with the aim of
reinstalling
it again to correct this error, I actually get the same error
message!!
I have searched the Microsoft website for hints on this error code,
but
cannot find any. Can somebody tell me what I need to do step by step
to
correct this error as I am a bit of a novice I'm afraid!! Many
thanks
and
regards, Steve B.